Getting Started With The Configuration - Cisco Small Business AP541N Quick Start Manual

2
Getting Started with the
Configuration
This procedure describes how to access the Access Point Configuration
Utility:
• By using the default IP address of the access point., follow the
instructions in the
Default IP Address"
Assistant (CCA).
• If you are using the Cisco AP541N in the DHCP client mode in a network
supported by CCA, follow the instructions in
Utility by Using
If the access point IP address is changed, either by a DHCP
C
AUTION
server or manually, your link to the access point will be lost
and you must enter the new IP address to use the Access
Point Configuration Utility.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
P o w e r
"Display the Configuration Utility By Using the
section if you are not using Cisco Configuration
CCA.
t
E th e r n e
Display the Configuration
3