Connecting The Product Safely - Brother FAX-2890 Product Safety Manual

Connecting the product safely

WARNING
There are high voltage electrodes inside the product. Before you clean the inside of the product,
make sure you have unplugged the telephone line cord first and then the power cord from the
electrical socket. Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a
qualified electrician.
DO NOT allow anything to rest on the power cord. DO NOT place this product where people
may step on the cord.
To ensure safe operation, the supplied three-pin plug must be inserted only into a standard
three-pin electrical socket that is properly earthed through the standard electrical wiring.
8
1