Table of Contents
Advertisement
WARNING
1. Always work from the windward side.
2. Be alert to bystanders or fragile things in the
blowing direction.
1. Put material into the tank with the regulator lever
kept at the bottom position. lf the regulator is
opened, the material will blow out concurrently
with the start of the engine.
(1) Regulator lever
(2) Tank
2. Tighten the tank cap securely.
3. Start the engine and carry the unit on your back.
■ SETTING THROTTLE LEVER
Set the throttle lever to the full throttle position at
the time of spraying work.
(1) Full throttle
(2) Throttle lever
14 - English
Operation
■ SETTING ADJUST LEVER STOPPER)
To maintain shutter opening at the same level for
a spray operation, set the regulator lever stopper
on the required position.
1. Slide the stopper while pulling the knob.
(1) Stopper
(2) Notch
(3) Regulator Lever
2. Release the knob when the stopper is on one
notch above the required opening.
Advertisement
Table of Contents
