Video; Table 15. 2D Graphics Video Modes - Dell PowerEdge R715 Technical Manual

Hide thumbs Also See for PowerEdge R715:
Table of Contents

Advertisement

Dell

12 Video

The R715 Integrated Dell Remote Access Controller 6 (iDRAC6) incorporates an integrated video
subsystem, connected to the 32-bit PCI interface of the SP5100. This logic is based on the Matrox
G200. The device only supports 2D graphics.
The video device outputs are multiplexed between the front and rear video ports. If a monitor is
connected to the front video connector, it will take precedence over the rear connection, thereby
removing the display from the rear connection.
The integrated video core shares its video memory with the iDRAC6's 128 MB DDR2 application space
memory. This memory is also used for the KVM buffer.
The R715 system supports the following 2D graphics video modes shown in Table 15:
*These resolutions are supported through the rear video connector only.
PowerEdge R715 Technical Guide
Table 15.
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024*
1280 x 1024*
2D Graphics Video Modes
Refresh Rate (Hz)
60, 72, 75, 85
56, 60, 72, 75, 85
60, 72, 75, 85
75
60, 75, 85
60
Color Depth
(bit)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16
32
®
43

Advertisement

Table of Contents
loading

Table of Contents