Assembly - Healthrider E660 Elliptical Crosstrainer HREL09984 User Manual

ASSEMBLY

Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools are required for assembly: the included allen wrenches and your own
phillips screwdriver adjustable wrench and rubber mallet .
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page18. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M8 Split M10 Split Curved M10 Flat
M8 Washer
Washer (73)Ð4
Washer (85)Ð4 (89)Ð4 Washer (74)Ð4 Washer (94)Ð5
M4 x 16mm M10 Nylon
M4 x 16mm M8 x 19mm Button Console Plate
Flange Screw
Screw (60)Ð5 Screw (76)Ð4 Screw (39)Ð4 Locknut (55)Ð6
(88)Ñ6
Handlebar Bolt (92)Ð4
Patch Bolt (90)Ð1
Carriage Bolt (2)Ð2
5