Table of Contents
Advertisement
ASSEMBLY
Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools are required for assembly: the included allen wrenches
phillips screwdriver
1. Note: Make sure that the two 5/16" x 1" Screws (76)
are loose.
Tap a 1/2" Axle Cap (39) onto one end of the Incline
Motor Axle (14). With the help of a second person,
raise the Incline Frame (7). Insert the Incline Motor
Axle through one side of the Incline Frame, through
a Plastic Spacer (91), through the end of the motor
screw, through another Plastic Spacer (91), and
through the other side of the Incline Frame.
Tap a 1/2" Axle Cap (39) onto the other end of the
Incline Motor Axle (14).
Tighten the two 5/16" x 1" Screws (76).
2. Raise the Upright (3). Slide the 3/8" Washer (94)
onto the Patch Bolt (90). Secure the Upright by tight-
ening the Patch Bolt (90) into the Base Frame (1).
3. Secure the Cup Holders (87) in the console plate by
tapping the Cup Holders into the indicated holes.
adjustable wrench
4
and a rubber mallet
1
76
39
14
2
3
94
90
3
Console
Plate
and your own
.
Motor
Screw
39
91
7
1
87
Advertisement
Table of Contents
