Honeywell
Speed:5
〈Zoom〉
〈Direction〉 〈Focus〉
Zoom/focus/Iris
•
Zoom: please use WIDE and TELE to control PTZ zoom.
•
Focus: please use FAR and NEAR to control PTZ focus.
•
Iris: Please use CLOSE and OPEN to control PTZ aperture.
You can use joystick to control lens, clockwise is to zoom out and anti-clockwise is to zoom
in.
Preset setup >value:1
GOTO
Remove
Preset
Preset setup
After zoom and PTZ setup, input value and click ENTER to confirm.
Now you have set one preset.
GOTO
Move cursor to highlight GOTO.
Input preset value and click ENTER.
System goes to specified preset.
REMOVE
Move cursor to highlight REMOVE. Input preset value and click ENTER. Now
you have removed one preset.
Note: Some protocols do not support remove preset function. You can modify to
replace the previous one.
34
〈Iris〉
Preset setup >Value:1
GOTO
Remove