Healthrider AIRE STRIDER E60 HRCCEL59930 User Manual Page 15

Healthrider user's manual home gy,.
Hide thumbs
Adjust the angle of the ramp as desired.
4
See step 4 on page 12.
Monitor your progress with the two displays.
5
See step 5 on page 12.
Measure your heart rate if desired.
6
See step 6 on page 13.
Turn on the fan if desired.
7
See step 7 on page 13.
When you are finished exercising, the console
8
will automatically turn off.
See step 8 on page 13.
HOW TO USE HEART RATE PROGRAMS
Heart rate program 7 is designed to keep your heart
rate between 50% and 85% of your estimated maxi-
mum heart rate during your workout. (Your maximum
heart rate is estimated by subtracting your age from
220. For example, if you are 30 years old, your esti-
mated maximum heart rate is 190.) Heart rate pro-
gram 8 is designed to keep your heart rate near a tar-
get heart rate that you choose.
Follow the steps below to use a heart rate program.
Press any button on the console or begin
1
pedaling to turn on the console.
See step 1 on page 12.
Select one of the heart rate programs.
2
When the power is
turned on, the man-
ual mode will be
selected. To select
a heart rate pro-
gram, press the
Program button
repeatedly until "P 7" or "P 8" appears in the right
display.
During heart rate
programs, the
matrix will display a
graphic that repre-
sents your heart
rate. Each time a
heartbeat is detect-
ed, an additional peak will appear in the matrix.
Enter your age or a target heart rate setting.
3
If you have
selected heart
rate program 7,
the word "AGE"
and the current
age setting will
flash in the left dis-
play. If you have already entered your age, press
the Enter button and go to step 4. If you have not
entered your age, press the – and + buttons
repeatedly to enter your age, and then press the
Enter button. Once you have entered your age, it
will be saved in memory.
15

   Related Manuals for Healthrider AIRE STRIDER E60 HRCCEL59930

This manual also for:

Aire strider e60, Hrccel59930

Comments to this Manuals

Symbols: 0
Latest comments: