Download Print this page
American Standard Exposed Wall Mount Sink Faucet with Gooseneck Spout 7293.152 Installation Instructions

American Standard Exposed Wall Mount Sink Faucet with Gooseneck Spout 7293.152 Installation Instructions

Exposed wall mount sink faucet and gooseneck spout with everclean finish

Advertisement

Quick Links

Exposed Wall Mount
Sink Faucet and Gooseneck Spout
with
EverClean™ Finish
Congratulations on purchasing your American Standard faucet with
EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel, Stainless Steel,
Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
TOOLS REQUIRED
Channel Locks
ROUGHING-IN DIMENSIONS
ROUGH-IN
Prepare water supply lines per "Roughing-in
Dimensions". Install 1/2" NPT. SUPPLY NIPPLES
© A m e r i c a n S t a n d a r d I n c . 2 0 0 2
Installation
Instructions
7293.152
7293.252
Adjustable Wrench
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
Certified to comply with ANSI A112.18.1M
Plumbers' Putty or Caulking
Phillips Screwdriver

Advertisement

loading

Summary of Contents for American Standard Exposed Wall Mount Sink Faucet with Gooseneck Spout 7293.152

  • Page 1 Exposed Wall Mount Sink Faucet and Gooseneck Spout with EverClean™ Finish Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets. EverClean Finish • One wipe effortlessly removes spots • Eliminates the need for cleaners and scrubbing •...
  • Page 2 FINISH INSTALLATION Apply thread sealant or teflon tape to SUPPLY NIPPLES (1). Slide COUPLING NUTS onto INLET SHANKS (3). Thread ESCUTCHEONS fully onto INLET SHANKS (3). Thread INLET SHANKS onto SUPPLY NIPPLES (1). Distance between INLET SHANK outlets must be 8" to match the VALVE (5). Insert RUBBER WASHERS into INLET SHANK (3).

This manual is also suitable for:

7293.2527293.152