OPERATION
Narrow Cultivating
The two outer tines can be removed to give you a
narrower cultivating width. This width is
approximately 6 inches. This will give you the
ability to get between very closely spaced plants.
In order to do this, pull the lock pin out of the hole
in the end of the tine shaft. Slide the outside tine
set off the tine shaft and place a tine spacer,
included with your tiller, over the tine shaft. Repeat
this procedure for the other side. Secure the
spacer with the lock pin in the outer hole.
16
OHV
LOCK
PIN (2)
B
6 inches
TINE SPACER (2)
C
FG100 TILLER