10. Push the ExpressCard reader towards the side and remove it from the computer.
Installing the ExpressCard Reader
1.
Insert the ExpressCard reader in the compartment.
2.
Tighten the screws to secure the ExpressCard reader to the back of the computer.
3.
Connect the ExpressCard reader's flex cable to the system board.
palm rest .
4.
Replace the
back cover .
5.
Replace the
hard drive assembly .
6.
Replace the
keyboard .
7.
Replace the
keyboard trim .
8.
Replace the
back cover .
9.
Replace the
battery .
10. Replace the
11. Follow the procedures in
72
After Working Inside Your Computer.