Bottom Rack Loading - Kenmore 665.1511 Use & Care Manual

Ultra wash dishwasher

Hide thumbs Also See for 665.1511:

Use & care manual (23 pages)

Use & care manual (80 pages)

Table of Contents

Available languages

Removable Top Rack

The removable rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in the

lower level rack.

IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher.

To remove the rack (push tab rack stop):

1. Roll the rack

to ½ of the way out.

2. Remove each plastic push tab rack stop from the end of each track by pushing inward toward the

rack on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by

pulling straight out. Be sure to support the track while removing rack stops.

3. Roll the rack all the way out of the track and remove from the dishwasher.

To replace the rack:

Reverse the above steps 1 to 3 to replace the rack into the dishwasher.

Loading Recommendations

The bottom rack is best suited for plates, pans, casseroles, and

utensils. (See recommended loading patterns shown.)

Load small items in the bottom rack only if they are secured in

place.

Load plates, soup bowls, etc., between tines.

Load bowls securely between the rows of tines. Ensure that

there is space between dishes so that the spray will reach all

surfaces.

Load heavily soiled items facing the spray.

NOTE: Ensure that detergent dispenser is not blocked by tall

items such as cookie sheets and cutting boards placed at the

left-hand front of rack. See "Start Up/Quick Reference"

section.

Fold-Down Tines (on some models)

You can fold down one row of tines at the back of the bottom

rack in order to accommodate larger dishware.

Keep this tine row in the 60° position when using the

TurboZone

(on some models) option.

IMPORTANT: When moving tine row to the flat position, fold

only the tine row toward the front of the dishwasher.