Kenmore 587.1537 Series Use & Care Manual page 10

Preparing and Loading Dishes
Upper Rack Option
TOP RACK - option can be used to wash a wide assort-
ment of items when you don't have a full load. Also, when
the upper rack fills up with glasses and the lower rack is
still empty, you don't have to wait anymore for clean
glasses.
Adjustable Upper Rack
models)
To raise the upper rack, refer to the figure below.
A) Lift the rack straight upward.
B) Pull rack slightly forward as the adjustable mechanism
locks into place.
To lower the upper rack, lift the rack straight upward and
push rack slightly towards the rear of the dishwasher as it
is lowered.
(available on select
Loading the Bottom Rack
Features and appearance of racks and silverware basket
may vary from your model.
The bottom rack is best for plates, saucers, bowls, and
cookware. Large items should be placed along the edge
so they do not block the spray arm rotation. For best
results, place bowls, casseroles, and sauce pans with soiled
surface facing down or toward the center. Tilt slightly for
better drainage.
Make sure tall items do not block spray arm rotation.
Be sure pan handles do not protrude through the bottom
of the rack and block the spray arm rotation.
10 place settings standard loading pattern 10 place settings standard loading pattern
10 place settings standard loading pattern 10 place settings standard loading pattern 10 place settings standard loading pattern
12 place settings standard loading pattern 12 place settings standard loading pattern 12 place settings standard loading pattern 12 place settings standard loading pattern 12 place settings standard loading pattern
10