HP ProLiant BL460c Quickspecs page 2

QuickSpecs
Overview
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL460c G6 provides greater 2P x86 server blade density without compromise and maximum power-efficiency with
flexibility and choice.
HP ProLiant BL460c G6 server blade includes:
Processor: Processor Processor Processor
Up to two (2) Intel® Xeon® 5500 or 5600 Series processors, up to 2.93GHz
Intel® 5500 Chipset
Memory Memory: Memory Memory
Twelve (12) DIMM slots
Up to 192GB, using PC3-8500 DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2
DIMMs per Channel in 12 slots
Up to 48GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at
2 DIMMs per Channel in 12 slots
Storage Controller Storage Controller Storage Controller Storage Controller:
HP Smart Array P410i Controller (RAID 0/1)
Internal Drive Support Internal Drive Support Internal Drive Support Internal Drive Support:
Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives
Network Controller Network Controller Network Controller Network Controller:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn more at: NOTE: NOTE: NOTE:
www.hp.com/go/virtualconnect.
NOTE: NOTE: NOTE: NOTE: Each port is autosensing 1 Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect
components.
One (1) additional 10/100 server adapter dedicated to iLO 2 Management
Mezzanine Support Mezzanine Support Mezzanine Support Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-Port FlexFabric Adapter mezzanine option
Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex, QLogic or Brocade)
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
4X QDR (40Gbps) and DDR (20Gbps) InfiniBand (IB) Mezzanine options for low latency and high bandwidth
server interconnectivity
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage
Ports Ports Ports Ports:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot
Security - Trusted Platform Module: Security - Trusted Platform Module Security - Trusted Platform Module Security - Trusted Platform Module
One (1) internal TPM 1.2 module connector
Form Factor: Form Factor Form Factor Form Factor
HP ProLiant BL460c G6 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
Infrastructure Management Infrastructure Management Infrastructure Management Infrastructure Management:
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at:
compmatrix.html
HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and recovery,
HP ProLiant BL460c Generation 6 (G6) Server Blade HP ProLiant BL460c Generation 6 (G6) Server Blade HP ProLiant BL460c Generation 6 (G6) Server Blade HP ProLiant BL460c Generation 6 (G6) Server Blade
http://h18004.www1.hp.com/products/blades/components/c-class-
DA - 13238 Worldwide — Version 22 — June 22, 2011 Page 2