The Lcd Display - Kenmore 796.8099 Use & Care Manual And Installation Instructions

THE LCD DISPLAY

The display shows the settings, estimated time remaining, options, and status messages for your dryer. When the
dryer is turned on, the light in the display will illuminate.
9
4
1
STATUS/CYCLE DISPLAY
1
This portion of the display shows the selected
cycle, operating status, and special messages. If
a cycle has special instructions, they will also be
displayed in this area.
ESTImATED TImE REmAINING
2
When the START/PAUSE button is pressed, the
dryer will display the estimated (SENSOR DRY)
or set time (TIME DRY) remaining, and begin
tumbling.
NOTE: The cycle time on SENSOR DRY cycles
may fluctuate as the dryer recalculates drying
time for optimal results.
CYCLE SETTING INDICATORS
3
These indicators show the current cycle settings
for DRY LEVEL, TEMP. CONTROL, TIME DRY,
and BEEPER. To change these settings, press the
appropriate settings button.
CYCLE COmPLETION INDICATOR
4
Shows how much of the current drying cycle has
been completed.
HOW TO USE
5
6 7
CHILD LOCK ADD WATER
EST. TIME
20%
REMAINING
NORMAL
NORMAL MEDIUM
3
CHILD LOCk INDICATOR
5
When CHILD LOCK is set, the Child Lock indicator will
appear and all buttons are disabled except the ON/OFF
button. This prevents children from changing settings
while the dryer is operating.
ADD WATER INDICATOR
6
If the steam feeder is lack for water, this error may be
displayed. Fill the feeder and restart the cycle.
LINT FILTER INDICATOR
7
clogged during a load, the indicator will come on to let
you know that the filter should be cleaned immediately
for maximum efficiency. Always clean the lint filter before
every cycle.
8 CYCLE OPTION INDICATOR
These indicators show the cycle options for ANTI
BACTERIAL, DAMP DRY BEEP, and WRINKLE CARE.
For detailed information about the individual options,
please see the following pages.
23
8
0:41
2
HIGH
The dryer automatically detects reduced
air flow caused by a full lint filter. The LINT
FILTER indicator will light before each load
as a reminder to check the lint filter before
starting each load. If the lint filter becomes