Registering An Equalizer Curve Onto Each Disc; Additional Information; Precautions - Sony XDP-210EQ Operating Instructions Manual

Registering an equalizer
curve onto each disc
— Disc Sound Memory (DSM)
(CD/MD changer or CD/MD player with
program memory function)
Once you have registered the desired equalizer
curve and the sound characteristics (bass,
treble and subwoofer level) onto the discs, you
can enjoy the same equalizer curve every time
you play them. You can register up to 200
discs.
1
Play the desired disc.
2
Select the equalizer curve, and adjust the
sound characteristics.
3
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "DSM SET"
EN
appears.
CD1 SCHUBERT
DSM set
SUR EQ
4
Press (5) (ENTER) momentarily.
DSM
+Enter+
SUR EQ
When the DSM setting is complete, the
display will go back to the normal playback
mode.
Changing the stored equalizer
curve
Play the disc whose equalizer curve you want
to change, and follow the "Setting and storing
the equalizer curve".
Erasing the stored equalizer curve
1
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "DSM SET"
appears.
2
Press (5) (ENTER) for two seconds.
DSM
+Delete+
SUR EQ
8
Actual total number:
Additional
Information

Precautions

•If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before switching on.
•If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
•For safety reasons, keep your car audio
volume moderate so that you can still hear
sounds outside your car.
•If you connect this unit to the XDP-U50D,
this unit will not work.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
Fuse replacement
If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Warning
When replacing the fuse, be sure to use one
matching the amperage stated above the fuse
holder. Never use a fuse with an amperage
rating exceeding the one supplied with the
unit as this could damage the unit.
Sony XDP-210EQ (E) 3-856-153-12 (1)
Fuse (5 A)