Advertisement
increase, press the button for 2 seconds more and goes into continuous
status.
Cold/-
Cold/-
(5)Cold/-
Cold/-:Press the cold button and start cooling mode, press it once more and
quit cooling, press the cold button at the setting process, the number will minus,
press the button over 2 seconds and goes into continuous status.
3 3 3 3 INSTRUCTION
INSTRUCTION
INSTRUCTION
OF
OF
INSTRUCTION OF
OF FUNCTION
(1)
(1) Clock
(1)
(1)
Clock
Clock set
Clock
set
set
set
a press ON
b press SET
c press HOT/+ or COLD/-
d press SET
e press HOT/+ or COLD/-
Hot
Hot
and
and
cold
cold
temperature
temperature
(2)Hot
Hot and
and cold
cold temperature
temperature set
Press SET at the adjusting temperature flash, press HOT/+ or COLD/- set the
desired temperature. The hot temperature adjust between 70℃ and 90℃,the
cold temperature adjust between 5℃ and 15℃ (compressor cooling)or 10℃
and 15℃ (electrical cooling).
(3)Boiling
Boiling
Boiling function
Boiling
function
function
function
Under any heating status, press BOILING/SET button and go into boiling
function. The set boiling temperature is 95℃. When the temperature reach
95℃, then quit boiling progress and return to original status. When the boiling
function is working, the Heating indicator and temperature will flash together.
Sterilization
Sterilization
function ( ( ( ( for
function
function
(4) Sterilization
Sterilization function
Firstly put the items or goods into cabinet, close the cabinet door, then press
STERILIZTING/NIGHT LAMP over 2 seconds to start sterilization, when need
sterilization progress stop at the midway, press the button over 2 seconds and
quit the sterilization progress.
Sterilization setting have strong and weak two modes, the strong mode
time is 15 minutes and the weak mode time is 10 minutes. The selecting
method of strong and weak mode is: press SET button until the sterilization
indicator flash, press HOT/+ and COLD/- to select required sterilization mode.
During sterilizing process, please don't open the cabinet avoiding the
leakage of ozone. After one hour of sterilizing, the goods can be taken out. The
sterilizing cabinet just can store small items, such as cup and tea.
CHECKING
CHECKING
POSSIBLE
POSSIBLE
CHECKING POSSIBLE
CHECKING
POSSIBLE PROBLEMS
In case the dispenser get some problems, before you sending the dispenser to the
maintenance place, you may checking the problems by yourself as follows:
Malfunction
Malfunction
Malfunction
Malfunction
phenomena
phenomena
phenomena
phenomena
1. The LCD screen
does not display
FUNCTION
FUNCTION
FUNCTION
set
set
set
for
for
sterilization
sterilization
for sterilization
sterilization cabinet
PROBLEMS
PROBLEMS— — — — DIY
PROBLEMS
DIY
DIY
DIY
P P P P ossible
ossible
ossible
seasons
seasons
ossible seasons
seasons
1. The electrical power has
not been connected well
2. the ON/OFF switch is
not on
00:00 light
00:00 hour flash
06:00 set hour
00:00 minutes flash
06:23 set minutes
cabinet
cabinet
only
only
only) ) ) )
cabinet only
Clear
Clear
Clear
Clear the
1. Check if the plug inserted
into the power socket well
2. Check if the socket
connected with the power well
3. Turn on the switch
the
the
problem
problem
the problem
problem
Advertisement
