Group Omit (User Type 3.6) - Honeywell Galaxy 3-144 User Manual

Group Omit (User Type 3.6)

This option allows a type 3.6 type code to block omit all the omittable
zones that are open at the end of the confirm time in a group or multiple
groups. All zones in the required groups that have the omit attribute
enabled are omitted when this option is selected. Groups can be omit-
ted and reinstated without setting and unsetting the system.
On selecting the Group Omit Option the groups assigned to the user
code and keypad are displayed as well as the omit status of each group
(Y below the group indicates that it is omitted, N indicates that it is not
omitted). To omit a group, press the required key. The letter beneath
the group number changes from N to Y. To reinstate the group press
the key to toggle from Y to N.
NOTE:
NOTE:
On returning to the banner the keypad displays the message ZONES
OMITTED. Omitted zones remain omitted for one set period only or
until they are manually reinstated to the system.
The type 3.6 user must have group choice to
enter Group Omit.
The zones in the selected groups are omitted
from the system as soon as the group is
selected.
29