Sending A Contacts List Entry; Receiving A Contacts List Entry - Sharp GX25C User Manual

Sending a Contacts List Entry

→
"Contacts" "Contacts List"
1.
Highlight the desired entry.
2.
Press [Options] and select "Send Contact".
3.
Select "Via Bluetooth" or "Via Infrared".
For "Via Bluetooth"
The phone starts searching for Bluetooth wireless
technology enabled devices within 10 metres.
When detected, a list of enabled devices is displayed
allowing you to select the desired device. The
connection can be established and the entry is sent.
For "Via Infrared"
The phone starts searching for an infrared-enabled
device within 20 centimetres.
When detected, the infrared connection is established
and the entry is sent.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time except
when "Authentication" (p. 92) is set to "Off".
Tip
• You can send your own Contacts List entry. Highlight
"My Card" in step 1. For details on storing your
information in My Card, see "Registering Your
Information as a Contacts List Entry".

Receiving a Contacts List Entry

When the phone receives a Contacts List entry, a
confirmation message appears.
1.
Press [Yes].
The received entry is registered in the Contacts List.
Press [No] to reject.
Tip
• For details on making Infrared or Bluetooth wireless
settings, see "Connectivity" on page 90.
Contacts List 37