Menu Item L: Copy Table Data From; Menu Item Y: Set Display Modes - Sony MKS-8080 Operation Manual

Menu Item L: COPY TABLE DATA
FROM
Purposes
Menu item L is used to copy the table data from another
remote control unit.
Menu item L can be called not only from the menu
selection display but also from some setting displays by
pressing [L].
Setting procedure
1
Press [L] on the selection display to select menu item
L.
The display of menu item L appears.
SONY ROUTING SYSTEM SETUP MENU
A:Copy All tables from
B:Copy PANEL table from
C:Copy ROUTE table from
D:Copy Available Source/Destination table from
P:Copy PHANTOM table from
Inputs A,B,C,D,P,0-9 Selected = A
Station Number ?
Ctrl-E : MENU Ctrl-D : RETURN
2
Enter the station ID of the source remote control unit.
3
Select the table to be copied using the alphabetic keys.
A: To copy all the setting data
B: To copy the data set in "SET PANEL TABLE"
C: To copy the data set in "SET ROUTE"
D: To copy the data set in "SET AVAILABLE
SOURCE/DESTINATION"
P: To copy the data set in "SET PHANTOM TABLE"
4
Press [Enter].
Copying is executed, and the previous display is
restored.
To return to the selection display of the Setup
Menu
Press [Ctrl]-[E] on each setting display.
To return to the primary station menu
Press [Ctrl]-[D].
MKS-8082 V1.00 STATION NUMBER 6

Menu Item Y: SET DISPLAY MODES

Purposes
Menu item Y enables you to set panel display conditions.
Setting procedure
1
Press [Y] on the selection display to select menu item
Y.
The setting display of menu item Y appears, and the
cursor is placed at "DISPLAY MODES = 1."
Setting display (example)
SONY ROUTING SYSTEM SETUP MENU
SET DISPLAY MODES
DISPLAY MODES = 1 1 : NORMAL 2 : 2+2CHAR 3 : 4CHAR * : UNRELATED
PANEL FUNCTION = * 1 : NORMAL 2 : 4 DESTINATION
TALLY GROUP = - - - -
Ctrl-E : MENU Ctrl-D : RETURN
2
Select an item to be set using the alphabetic keys then
press [Enter].
3
Select an item from the selections on the right, or enter
the corresponding number.
For details, see the explanations of each item.
4
Press [Enter] to register the settings.
If you use the default settings, press [Enter] without
setting anything.
To return to the selection display of the Setup
Menu
Press [Ctrl]-[E] on each setting display.
To return to the primary station menu
Press [Ctrl]-[D].
MKS-8082 V1.00 STATION NUMBER 6
* : UNRELATED
Menu Operations
29