Table of Contents
Advertisement
Xerox© LCD Monitor User's Manual
4
Press the
button, located on the bottom side of the main
unit to turn the monitor on, then turn the computer on. If the
monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or
damage.
NOTE:
The
button is used for switching the LCD monitor on and
off, it does not disconnect the device from the main voltage.
To completely disconnect the main voltage, please remove the
power plug from the socket.
NOTE:
The LED indicator is green when the monitor operates normally
and will turn to amber when in power saving mode. When the
monitor is off, the LED turns dark.
Installation
1
Advertisement
Table of Contents
