Ecu Operating Code - Cannondale 5002401 Service Manual

Engine Calibration File ("Map")
Identification
All Cannondale factory authorized engine cali-
bration files are identified by a Numeric Cal ID code.
The Numeric Cal ID number defines the year,
model, and issue sequence of any specific engine
calibration file. The engine calibration Numeric Cal ID
number is displayed in the top left corner of the Can-
nondale Diagnostic and Maintenance Tool main
MODEL CODE
00 - X440s
01 - X440
02 - C440
03 - E440
30 - Cannibal
31 - Speed
32 - Blaze 440
33 - Moto 440
NOTE :
When a calibration file for a model is updated the SEQ number increases. However, due to continual product
evolution, the updated calibration file for the model may not be authorized for use in vehicles produced
previously. Always consult the Cannondale website for the compatibility of calibration files for a specific
vehicle VIN number.
A database of Cannondale authorized engine cali-
bration calibrations files is maintained on the Can-
nondale website so that service technicians have
ready access to the correct factory authorized cali-
bration files for a particular vehicle VIN.
Go to
http://www.cannondale.com/motorsports/tech/maps/
If "Untitled" is displayed in the top left corner of the
main window, no calibration file has been opened
(from a saved file) or received from the vehicle ECU.
window whenever a "map" is opened or received
from the vehicle ECU. The code number also dis-
plays at the Numeric Cal ID field within the main
window.
loaded at the factory with a model specific authorized
engine calibration file. This file can also be referred
to as the vehicle "map."
".ccf"
YEAR
Reset every 10 years
(ex. 2002)
30202.ccf
SEQUENCE NUMBER
Assigned sequentially.
New files are
assigned the next available
number 00-99 for the model.
Always check the website
to verify that a calibration
file is authorized for use
in a particular model.

ECU OPERATING CODE

before the engine calibration file is loaded.
.
like Windows 98 or XP, an "operating system" used in
many PCs. An engine calibration file can be thought
of as a program like Microsoft Excel or Netscape
Navigator, programs which run under Windows.
29 29
Cannondale vehicles (ATVs and motorcycles) are
Engine calibration files have the filename extension
Filename extension
All Cannondale authorized
engine calibration files will
have the filename extension
".ccf."
The ECU operating code is installed at the factory
The operating code also known as the "HEX" file is
8/14/02