Power Indicator; Bfc (Beat Frequency Control) Switch; Lpf (Low-Pass Filter)/Hpf (High-Pass Filter) Select Switch - Pioneer GM-X554 Owner's Manual

Bridgeable four-channel power amplifier
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Power Indicator

The power indicator lights when the
power is switched on.

LPF (Low-Pass Filter)/HPF (High-Pass Filter) Select Switch

Set the LPF/HPF select switch as follows according to the type of speaker that is connected
to the speaker output connector and the car stereo system:
LPF/HPF Select
Switch
LPF (Left)
OFF (Center)
HPF (Right)
* See the "Cut Off Frequency Control" section.
Audio frequency range
to be output
* — 40 to 120 Hz
Full range
* 40 to 120 Hz —

BFC (Beat Frequency Control) Switch

If you hear a beat while listening to an
MW/LW broadcast with your car stereo,
change the BFC switch using a small
standard tip screwdriver.
Speaker
Remarks
Type
Subwoofer
Connect a subwoofer.
Full range
Full range
Use if you want to cut the
very low frequency range*
because it is not necessary
for the speakers you are
using.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gm-x564Gm-x644

Table of Contents