Slide the water tank back into the appliance (1). Then put the water
bucket back into the appliance (2).
Note: You can only put the water tank back into the appliance if the water
bucket is not in the appliance.
Place the water bucket cover on the opening (1) and slide it to
the right (2) to lock it.
inserting the battery in the remote control
The battery (type CR2025) for the remote control is supplied with the
appliance. Put the battery in the remote control before you start using the
Push on the battery holder hook (1) and remove the battery holder
from the remote control (2).
Remove the packaging material from the battery.
Place the battery in the battery holder with the + side pointing