Use Of Your Appliance; The Control Panel; Programme Selector; Rinse Hold Pushbutton - Zanussi TL1093V Instruction Book

Washing machine tl 1093 v
Table of Contents

Advertisement

The control panel

Never turn the programme selector when the appliance is working.
2
1
3
1 ON/OFF pushbutton " "
Press the ON/OFF pushbutton, the programme
starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working (on/off pushbutton " " pressed). It lights
off when the cycle is finished (programme selector
on a stop position "I")
3 Half load pushbutton "
This pushbutton allows to wash small quantity of
linen not much soiled (2,0 kg) only on the cotton
programmes.

4 Rinse hold pushbutton "

Press this button to leave the water in the drum
after the wash cycle is completed. This works on
all the washing programmes. The clothes are left
suspended in water after the final rinse to prevent
the formation of creases.
You can end these programmes by a spinning by
depressing this pushbutton or select the pro-
gramme Q for a draining phase (with the on/off
" "
pushbutton
pressed out).

USE OF YOUR APPLIANCE

500
350
4
5
"
"
C
6
5 Spinning speed variator
It enables to select the spinning speed of your
washing machine from
Thus, you can choose the spinning speed suiting
best to the nature of your laundry and to the degree
of humidity wished at the end of the wash.

6 Programme selector

It enables to select the most adapted programme
to the nature and degreees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position off "I" or on a position
rinse hold "
" (rinse hold pushbutton selected)..
Never turn the programme selector anticlockwise.

7 Temperature selector

It enables to choose the mosta adapted temperature
between cold (
) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indica-
tions or the programme table, according to the
fibers and the fastness of the colours.
TL
1093 V
30
7
(draining) to 1000 rpm.
25

Advertisement

Table of Contents
loading

Table of Contents