Use; Control Panel; Controls - Zanussi F 902 User Manual

Use

Control panel

1 Programme chart
It will help you to choose the most suitable washing
programme for your laundry.
2 Spin speed selector dial
This selector allows you to select the spin speed or
the NO SPIN option
spinning phases are suppressed. To be used for
items that tend to wrinkle. If selected on programmes
A and B the machine will perform an extra rinse (4
instead of 3).
The spin speeds on the selector refer to cottons.
For programme G (short spin), position 900
corresponds to 650 rpm.
Position 300 corresponds to 300 rpm for all
programmes.
3 Mains-on light
It comes on when the machine starts operating and
goes out by depressing ON/OFF button to switch the
machine off.
4 On/Off button
Press this button to start the machine. The same
button is used to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the On/Off button.
. In this position all the
5 Quick wash button
By depressing this button on cotton programme B
and synthetic programme F the washing time will be
reduced by approx. 35 mins for cotton from COLD
to 60°C and by 20 mins for synthetics.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
6 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
7 Programme selector dial
To select the required washing programme turn the
dial clockwise.
10
).