Description of the Hob
1. Hob Top
2. Triple Crown Burner
3. Semi-rapid Burners
4. Auxiliary Burner
5. Control knob for back right burner (semi-rapid)
6. Control knob for back left burner (semi-rapid)
7. Control knob for front left burner (triple crown)
8. Control knob for front right burner (auxiliary)
Any gas installation must be carried out by
qualified personnel, and in accordance with existing
rules and regulations.
The relevant instructions are to be found in the
second section of this manual.
Please, ensure that, once the appliance is
installed, it is easily accessible for the engineer
in the event of a breakdown.
WHEN THE HOB IS FIRST INSTALLED
Once the hob has been installed, it is important
to remove any protective materials, which were
put on in the factory.
THE HOB LID
In order to make the appliance match with the
kitchen design, a lid can be fitted on the hob.
The lid (available on request) is meant to avoid dust
to settle on the hob, when it is closed, and to collect
splashes of oil or fat, when it is open. Do not use it for
any other purpose.
Always wipe off any splash of liquid before opening
Always clean the lid from cooking residues before
opening it or taking it off.
WARNING! The crystal lid can splinter when
overheated. Always ensure all the burners are
off before closing it.