INSTRUCTIONS FOR THE INSTALLER
The following instructions are intended for the installer
in order that the operations of installation, regulation
and maintenance are carried out in the best possible
manner and according to the regulations in force. All
interventions must be carried out with the appliance
THE MANUFACTURER DECLINES ALL
RESPONSIBILITY FOR DAMAGES CAUSED BY
AN INSTALLATION WHICH DOES NOT COMPLY
WITH THE REGULATIONS IN FORCE.
Installation and maintenance of the appliance must be
carried out by a professional qualified according to the
articles regulating the art in force, noteably: NBND
For appliances connected to the electricity network:
We shall not be responsible in case of accidents or
incidents caused by inexisting or defective earthing.
The appliance is of type X.
It has been designed to be placed between two other
units whose sides can tolerate temperatures
exceeding that of the room by 75˚C.
WHEN THE COOKER IS FIRST INSTALLED
Once the cooker has been installed it is important to
remove the protective materials which were put on in
Switch the oven control to MAX and leave it to run,
empty, for 30 minutes to remove any unpleasant new
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
The cookers are supplied with adjustable feet fitted on
the back and front angles of the base.
The feet can be regulated (Fig. 18) to adjust the height
of the appliance to that of the neighbouring units and
for an even distribution of liquids contained in pans.