JVC GV-LS1 Detailed User Manual page 22

4 Enter "PASSWORD".
5 Click the "SAVE" button.
The settings to be configured on a browser have
been complete. Close the browser, and shutdown
the computer.
6 Press and hold the power button to power off.
7 Disconnect the LAN cable that connects the
camera to your computer.
8 Set the network mode switch to "WLAN".
9 Press and hold the power button to power on.
When the "WPS" button stops blinking and stays lit,
the connection is complete.
22
Connecting manually
1 Select "WIRELESS NETWORK" in "NETWORK".
If the sub settings are not displayed, click "+" on the
left of "NETWORK".
2 Click the "MANUAL" button.
3 Enter the information, and click the "SAVE"
button.
The settings to be configured on a browser have
been complete. Close the browser, and shutdown
the computer.
4 Press and hold the power button to power off,
and disconnect the LAN cable that connects the
camera to your computer.
5 Set the network mode switch to "WLAN".
6 Press and hold the power button to power on.
When the "WPS" button stops blinking and stays lit,
the connection is complete.