Use; Control Panel; Rinse Hold Button; Temperature Selector Dial - Zanussi FLS474 Instruction Booklet

Control panel

B Blancos con prelav.
Blancos 60º- 90º
B 40º- 60º Sintéticos con prelav.
Colores
Lavado rápido
Colores delicados C 30º- 40º
K Aclarados
Sintéticos 30º- 60º
L 30º- 40º Suavizantes
Delicados
Centrifugado
Lana M 30º- 40º
Descarga
1
1 Detergent dispenser drawer

2 Rinse hold button

Press this button to make the machine stop with
water in the drum after the synthetic or delicate
wash cycles.
This prevents any creasing which may take place
if the clothes are left damp in the drum. When it
is convenient for you to empty the machine,
simply press this button again so that the
machine can proceed to drain, or turn the dial to
the spin programme "H".

3 Half load button

Select this button to reduce water consumption
on the rinse cycle when washing a smaller load
of cottons or linens (max. load size=2.25 kg).
The machine will carry out 3 rinses instead of 4.
4 No spin button
Depress this button when you have to wash
particularly delicate cotton or linen items in order
to exclude all the spinning phases.
26

USE

A
60º- 90º
J
30º- 60º
D 30º- 40º
F
N
G P
H
Q
2 3 4 5
6
5 START/STOP button
Press this button to start the machine: the «pilot»
light will come on. The same button is used to
switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the same button.

6 Temperature selector dial

Turn this dial to select the washing temperature.
Position = cold wash.
7 Operating pilot light
This light is on whilst the machine is operating
and goes out at the end of the programme.

8 Programme selector dial

To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
8
7