Use; Control Panel; Controls - Zanussi FJS 1276 Instruction Booklet

Use

Control panel

1 2 0 0
B 60º- 95º
B
40º- 60º
B 30º- 60º
H 30º- 60º
H 30º- 40º
K
30º- 40º
L 30 - 40º
1
1 Programme chart
The programme chart on the front side of the
detergent dispenser drawer provides a general view
of programmes available.
2 Spin reduction button
By pressing this button the spin speed is reduced in
the normal programmes for cotton and linen from
1200 rpm to 850 rpm.
3 Intensive rinse button
By pressing this button with normal programmes for
cotton and linen, rinses are carried out with more water.
It is recommended in those areas where water is
particularly soft and for people with sensitive skin.
4 Quick wash button
By pressing this button with C and J programmes
the wash time is reduced.
This button is particularly useful when slightly soiled
garments have to be washed.
5 Economy button
By depressing this button on programmes B and H
and by selecting the temperatures indicated in the
programme chart, the washing time will be
prolonged by approx. 20 mins in programme B and
10 mins in programme H. This will compensate for
the reduction in temperature allowing you to save
energy by obtaining at the same time good washing
results.
A 30º- 40º
C J 30º- 40º
M
D
F N
G P
Q
2 3 4 5 6 7 8
6 Anti-crease button
By pressing this button in the gentle programmes
laundry remains in the water of the last rinse to
prevent the formation of creases.
To drain water, press this button again (the laundry
is gently spun) or select drain programme Q.
7 ON/OFF button
By pressing this button the machine is switched on
and off.
8 Temperature selector dial
By turning this dial to the right or to the left it is
possible to select the desired temperature.
Position : the machine uses water taken directly
from the water supply, without heating it.
9 Control light
It is on when the machine is started and goes off
when the ON/OFF button is pressed again to switch
the machine off.
10 Programme selector dial
By turning it clockwise, you choose the desired
wash programme.
Important!
The programme selector must be turned only when
the machine is off.
F J S 1 2 7 6
9 10
11