Table of Contents
Advertisement
Note
The Master access code is
1-2-3-4 when the panel is
shipped. You should change
your Master Access Code
after your system is installed
(see "Access Code").
14
Version 3
*
Press for program
information.
Light
Control
*
Unit #
4
Instruction
Summary
Add Option
Option #1: Panel Beeps
Option #2:
Panel Voice
Option #3:
Latchkey Time
Option #36:
Sensor Activated Light Lockout Start Time
Option #37:
Sensor Activated Light Lockout Stop Time
Option #41:
Chime Voice
Option #42:
Speaker Volume
Option #43:
Pager Phone Number
Option #55:
Status Beep Volume
Add
Option #
Press
and follow voice prompts.
See Note
2.
Enter the Master Access Code.
3.
The system voice will prompt you to begin with the START MENU.
The START MENU includes the following buttons:
•
Add
•
Delete
•
Cancel
•
Test
•
Clock Set
Press the appropriate button.
4.
After pressing the appropriate button on the START MENU, the system voice will
prompt you to use the MAIN MENU.
The MAIN MENU includes the following buttons:
•
Light Control
•
Option #
•
Sensor/Remote
•
Access Code
Press the appropriate button. Depending on the button you pressed, the system will
prompt you to continue by pressing other buttons on the panel.
Access Codes
Your security system has a master access code and access codes 1-5 used for arming and
disarming the panel. The master code is used for disarming and programming your sys-
tem. Access codes 1-5 are generally used for children or as temporary codes for a baby-
sitter or service personnel.
START MENU
Add
Delete
Cancel
Test
MAIN MENU
Sensor/
Access
Option #
Remote
Code
*
*
0
1
2
CONTROL MENU
Entry/Exit
Delay
Sensors
Time
-
*
*
*
5
6
7
-
Minutes
+
DONE
Add Access Code
Add
Access Code
DONE
Press
See Note
use red numbers to enter 4-digit code.
Set Clock
Clock Set
Hours
Minutes
Press
See Note
System should be checked
by a qualified technician
at least every three years.
Clock
Set
3
Note:
Hold key or press
Hours
+
repeatedly until you
hear the desired item.
8
9
Delete
To delete an option or access code
Delete
press
and follow the voice
prompting.
Cancel
If you make a mistake or want to
, then
Cancel
start over press
Sensor or Phone Test
Test
DONE
To select a test, press
and
follow the voice prompting.
Security Pro 1000
Advertisement
Table of Contents
