To Save A Setup To Registration Memory; To Recall A Setup From Registration Memory - Casio CTK-5200 User Manual

To save a setup to registration
memory
bo
1.
Press (RHYTHM).
Bank number
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
bs
3.
Press to select the bank you want.
bs
Each press of cycles through the bank numbers.
Bank 4
• You also can select a bank by holding down
br
use the (10-key) number buttons to enter a bank
number.
4.
While holding down
cm
to to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
S t o r e
Stored in Setup 4-1
bs
as you
cn
, press a button from
Saving Keyboard Setups to Registration Memory
To recall a setup from registration
memory
bs
1.
Press to select the bank that contains the
setup you want to recall.
2.
Use buttons
setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
R e c a l l
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
bt
(page E-18). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
• Memory card (page E-59)
• Computer (page E-68)
Bank 6
bt cm
to to select the area whose
Setup 6-1 recalled
E-49