Casio CTK-5200 User Manual page 25

6.
After the sound you want to sample is finished,
cr cs
press and at the same time.
S m
p
Used memory
(Unit: Kbytes)
Sampling will stop.
• Even if you do not press
automatically whenever there is no more sound being
input from the external device. Sampling also will stop
automatically 10 seconds after it is started.
7.
Press the keyboard key.
• You can repeat steps 3 through 6 to change other sounds
that make up the currently selected drum set. There are
eight sounds per drum set.
• You may not be able to get 10 seconds of sampling if
Digital Keyboard memory is low due to storage of other
data. If this happens, deleting other memory data you no
longer need will free up memory space and you should be
able to sample for 10 seconds. See "Deleting a Sampled
Sound" on page E-25 for more information.
• Sampling a sound will delete any sound data currently
assigned to the same keyboard key. To help ensure
that you do not accidentally delete important data, be
sure to read "Protecting Against Accidental Deletion of
Sampled Sounds" on page E-26.
Sampling Sounds and Playing Them on the Digital Keyboard
l D r m 1
Remaining
memory capacity
cr cs
and , sampling will stop
Editing Sampled Drum Set Sounds
You can use the procedures in this section to copy the drum
sound assigned to one keyboard key to another key, to
change the pitch of a sound, and to delete a sampled sound.
1. bn
Press (TONE) and then use
enter the tone number (606, 607, or 608) for the
drum set you want.
2. cr cs
Press and at the same time.
3. ct
Press (FUNCTION).
S m
p
Flashes at high
speed
This is the editing mode.
• While in the editing mode, you can copy a sound,
change the pitch of a sound, or delete a sound (each of
which is described below). Pressing
again exits the editing mode and returns to step 2 of
this procedure.
Indicates keyboard keys that have sounds assigned.
■ To copy a sampled sound from one key to
another
While holding down the keyboard key to which the sampled
sound you want to copy is assigned, press the keyboard key
to which you want to copy it.
Example: To copy sampled sound of key C4 to key D4
Indicates the keyboard key whose sound was copied.
• A keyboard key that already has a sampled sound assigned
cannot be selected as a copy destination.
br
(10-key) to
l D r m 1
ct
(FUNCTION)
E-23