Toshiba Strata DK8 User Manual page 76

STRATA DK DIGITAL TELEPHONE
To Store in a System or Station
Speed Dial Location:
1. Do not lift the handset.
2. Press the Redial button,
then the Speed Dial button.
3. Dial a 2-digit Speed Dial
location.
4. Enter a feature access code
or sequence of codes.
5. Press the Redial button.
2-54
If you lifted the handset in Step 1, the system would automatically dial
the number that you most recently dialed after you press the Redial
button.
If your station does not have the Speed Dial button, dial
Station Speed Dial locations are 1 0 ~ 4 9. System Speed Dial locations
are 6 0 ~ 9 9 and can only be stored at Station 10.
Refer to the feature access code list in Table 2-A.
You can only enter 20 digits maximum. Dial pad digits count as 1 digit,
while the Cnf/Trn, Intercom, and Hold feature buttons each count as two.
The feature access code or codes are stored in memory.
NOTE: To exit the entry mode to answer or make a call, press the Redial
button.
FEATURE OPERATION
instead.
*