Operation; Engine Break-In - Yamaha SUV1200 WaveRunner 2004 Owner's/Operator's Manual

EJU01836

Operation

WARNING
@
Before operating
become familiar with all controls. Con-
sult your Yamaha dealer about any con-
trol or function
understand. Failure to understand how
controls work could cause an accident or
prevent you from avoiding an accident.
@
CAUTION:
@
Make sure that the stern drain plugs are
securely tightened before launching the
watercraft.
@
EJU01888

Engine break-in

The engine break-in period is essential to
allow the various components of the engine
to wear and polish themselves to the correct
operating clearances. This ensures proper
performance and promotes longer compo-
nent life.
CAUTION:
@
G For the first tankful of operation, pre-
mix a 50:1 mixture of fuel and oil (in
addition to the oil in the oil tank).
G
After break-in, use straight gasoline
for normal operation.
@
1. Launch the watercraft and start the
engine. (See page 3-18 for engine start-
ing procedures.)
2. Run the engine at the lowest possible
speed for 5 minutes.
3-16
E
your watercraft,
you do not fully