Yamaha FX High Output WaveRunner 2005 Owner's/Operator's Manual page 78

Table of Contents

Advertisement

3. Attach the clip 1 to the engine shut-off
switch 2 and attach the engine shut-off
cord 3 to your left wrist.
WARNING
@
Check that the engine shut-off cord is not
frayed or broken, and keep it free from
the handlebars so the engine stops if the
operator falls off. The engine shut-off
cord may not pull free if wrapped around
the handlebars when the operator falls
off, allowing the watercraft to continue to
run and cause an accident.
@
NOTE:
@
It is not possible to start the engine with the
clip removed from the engine shut-off
switch.
@
4. Push the start switch (green button).
NOTE:
@
The engine will not start if the throttle lever is
squeezed.
@
5. Release the start switch as soon as the
engine starts to run.
CAUTION:
@
G
Never push the start switch while the
engine is running.
G
Do not operate the start switch for
more than 5 seconds, otherwise the
battery will be discharged and the
engine will not start. Also, the starter
motor may be damaged. If the engine
does not start in 5 seconds, release
the start switch, wait 15 seconds, and
then try again.
@
3-21
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2005 waverunner fx cruiser high output

Table of Contents