Pre-Operation Checks; Pre-Operation Check List - Yamaha XLT800 WaveRunner 2003 Owner's/Operator's Manual

EJU01346
EJU01349

Pre-operation check list

Before operating this watercraft, perform the checks in the following check list. See the
accompanying text in this chapter for details on how to perform the checks.
WARNING
@
If any item in the pre-operation check list is not working properly, have it inspected
and repaired before operating the watercraft, otherwise an accident could occur.
@
ITEM
Engine compartment
Bilge
Throttle
Steering system
Shift lever and reverse gate
Fuel and oil
Water separator
Battery
Front and rear seats
Hull/Deck
Jet unit
Fire extinguisher
Engine shut-off cord
Switches
Cooling water pilot outlet
Multifunction meter
NOTE:
@
Pre-operation checks should be made thoroughly each time the watercraft is used. This pro-
cedure can be completed in a short time. It is worth the time spent to assure safety and reli-
ability.
@

Pre-operation checks

Remove all seats and front storage compart-
ment to ventilate engine compartment. Check for
fuel vapors or loose electrical connections
Check for water and fuel residue and remove if
necessary
Check that the throttle lever springs back
Check for proper steering system operation
Check for proper operation
Check fuel and oil level and add if necessary
Check hoses and tanks for leakage
Check for water and drain if necessary
Check electrolyte level and battery condition
Check that the seats are properly secured
Check the hull and deck for cracks or other dam-
age
Check for debris and remove if necessary
Check the condition and replace if necessary
Check condition and replace is frayed or broken
Check the start switch, engine stop switch and
engine shut-off switch for proper operation when
the watercraft is in the water
Check that water is discharged while the engine
is running and the watercraft is in the water
Check for warning indications and proper opera-
tion
3-5
ROUTINE
E
PAGE
3-6
3-7
3-10
3-10
3-11
3-6
3-7
3-8
2-5, 2-6
—
3-12
3-9
3-12
3-13
3-13
3-13