Manual Terminology - Motorola MVME167 Series User Manual

Manual Terminology

Throughout this manual, a convention is used which precedes data and address
parameters by a character identifying the numeric format as follows:
$ dollar
% percent
& ampersand
Unless otherwise specified, all address references are in hexadecimal.
An asterisk (*) following the signal name for signals which are level significant
denotes that the signal is true or valid when the signal is low.
An asterisk (*) following the signal name for signals which are edge significant
denotes that the actions initiated by that signal occur on high to low transition.
In this manual, assertion and negation are used to specify forcing a signal to a
particular state. In particular, assertion and assert refer to a signal that is active or true;
negation an negate indicate a signal that is inactive or false. These terms are used
independently of the voltage level (high or low) that they represent.
Data and address sizes are defined as follows:
A byte is eight bits, numbered 0 through 7, with bit 0 being the least significant.
A word is 16 bits, numbered 0 through 15, with bit 0 being the least significant.
A longword is 32 bits, numbered 0 through 31, with bit 0 being the least
significant.
MVME167/D3
specifies a hexadecimal character
specifies a binary number
specifies a decimal number
Manual Terminology
1-9
1