Selecting Preset Stations; Exchanging Preset Stations - Yamaha RX-V363 Owner's Manual

Selecting preset stations

You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
y
When performing this operation with the remote control, press
4 TUNER to select "TUNER" as the input source.
Press D A/B/C/D/E (or 7 A/B/C/D/E l / h)
1
repeatedly to select the desired preset
station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
Press E PRESET/TUNING l / h (or
2
7 PRESET l / h) to select the desired
preset station number (1 to 8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.
E1 FM 87.50MHz
:

Exchanging preset stations

You can exchange the assignments of two preset stations
with each other. The example below describes the
procedure to exchange preset station "E1" with "A5".
Select preset station "E1" using D A/B/C/D/E
1
and E PRESET/TUNING l / h.
See "Selecting preset stations" on this page.
Press and hold B PRESET/TUNING for
2
more than 3 seconds.
"E1" and the MEMORY indicator flash in the front
panel display.
E1 FM 87.50MHz
:
Flashes
3
Select preset station "A5" using
D A/B/C/D/E and E PRESET/TUNING
l / h.
"A5" and the MEMORY indicator flash in the front
panel display.
See "Selecting preset stations" on this page.
A5 FM 90.50MHz :
Flashes
Press B PRESET/TUNING again.
4
"EXCHANGE E1–A5" appears in the front panel
display and the assignments of the two preset stations
are exchanged.
FM/AM tuning
Flashes
MEMORY
Flashes
MEMORY
39
En