Fuel Management Meter - Yamaha 115A Owner's Manual

YAMAHA
FUEL MANAGEMENT
q
P S
TTL ECON SYNC
e
set mode
SPEED
TRIP TIME BATT
YAMAHA
FUEL MANAGEMENT
P S
TTL ECON SYNC
set mode
ON
1 2 3 4
I/h
gph
Km/L
mpg
w
Km/h
knot
mph
km
mile
802021
I/h
gph
5 6
q
l/h
(liter)
gph
(gallon)
2-17
EMD42012

FUEL MANAGEMENT METER

Optional equipment
The meter contains the fuel flow meter,
fuel consumption meter, fuel economy
meter, twin engine speed synchronizer,
water separator warning indicator.
1 Fuel flow meter
2 Fuel consumption/Fuel economy
meter/Twin engine speed synchronizer
3 Water separator warning indicator
(Operates only if the sensor has been
installed.)
NOTE:
After the main switch is first turned on, all
portions of the meter come on as a check.
After a few seconds, the meters will
change to normal operation. Watch the
meter when turning on the main switch to
make sure all segments come on.
EMD32010
Fuel flow meter
The meter displays fuel flow within one
hour, at the rate of current engine opera-
tion.
If twin engines are installed on your boat,
the meter will display total fuel flow of
Port and Starboard side engine. It also
displays PS indication at the same time.
By pressing "set" button, the meter will
display fuel flow of starboard side engine
and S indication.
By pressing "set" button again, the meter
will display fuel flow of port side engine
and P indication.
By pressing "set" button again, the meter
will display total fuel flow.
E