1
1. Bolt (
2)
Seat
To remove
1. Remove panels A and B. (See
page 6-6 for panel removal
and installation procedures.)
2. Remove the rider seat bolts
and lift the seat upward.
INSTRUMENT AND CONTROL FUNCTIONS
2
1. Projection
2. Seat holder
EAU03020
To install
1. Insert the projection on the
front of the rider seat into the
seat holder, then tighten the
seat bolts.
2. Install the panels.
NOTE:
Make sure that the seat is securely
fitted.
1
1. Helmet holder
2. Open
Helmet holder
To open the helmet holder, insert
the key in the lock and turn it as
shown. To lock the helmet holder,
replace the holder in its original
position.
w
Never ride with a helmet in the
helmet holder. The helmet may hit
objects, causing loss of control
and possibly an accident.
3-9
1
1
2
2
3
4
EAU00260
5
6
7
EW000030
8
9