Something Not Working - Westinghouse SB916 User Manual

117994720 15032007.qxp
23 care and cleaning

Something not working

The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the chart,
without calling out a service technician.
Switch off the dishwasher and carry out the following suggested corrective
actions.
Fault code
continuous flashing
●
of the light of the
running program
appears in
the digital display
continuous flashing
●
of the light of the
running program
appears in
●
the digital display
continuous flashing
●
of the light of the
running program
appears in
the digital display
3/16/2007 11:52 AM
Malfunction
The dishwasher
does not fill with
water
●
The dishwasher will
not drain
Anti-flood device is
activated
●
Pagina 23
care and cleaning 23
Possible cause
The water tap is
● ●
blocked or furred
with limescale
The water tap is
● ●
turned off
The filter (where
● ●
present) in the
threaded hose
fitting at the water
inlet valve is
blocked
The water inlet
● ●
hose has not been
correctly laid or it
is bent or
squashed
The sink spigot is
● ●
blocked
The water drain
● ●
hose has not been
correctly laid or it
is bent or
squashed
Close the water
●
tap and contact
your local
Customer Care
Centre.
Solution
Clean the water
tap
Turn the water tap
on
Clean the filter in
the threaded hose
Check the water
inlet hose
connection
Clean out the sink
spigot
Check the water
drain hose
connection