Maintenance; Metal Grease Filters - AEG DF7190-M User Manual

20

MAINTENANCE

MAINTENANCE

Metal grease filters

CLEANING METAL SELF- SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months, or more
frequently in case of particularly heavy use of the hood.
Filters can be washed in a dishwasher.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having disconnected
the relative fastening elements.
• Wash the filters, taking care not to bend them. Let them
get dry before refitting them. (The colour of the filter
surface may change throughout the time but this has no
influence to the filter efficiency).
• When refitting the filters, make sure that the handle is
visible on the outside.
• Close the sliding suction panel.
Charcoal Filter (Recycling Version)
REPLACING CHARCOAL FILTERS
• These filters are not washable and cannot be regenerated,
and must be replaced approximately every four months or
more frequently by particularly heavy use.
• Pull out the sliding suction panel.
• Remove the grease filters.
• Remove the saturated carbon filter by releasing the fixing
hooks
• Fit the new filter by hooking it into its seating.
• Replace the grease filters.
• Close the sliding suction panel.
LIGHT REPLACEMENT
11 W fluorescent light
• Remove the metal terminals fixing the glass.
• Slide the glass cover out of one of the fastening clips.
Lower the unfastened part of the glass cover slightly, so
that the cover can be completely removed.
• Replace the light with a new one of the same type and
rating.
• Replace the glass cover in reverse order.
Lighting