When The Oven Is First Installed - Zanussi ZOU 91 K Instruction Booklet

When the oven is first installed

When the oven is first connected to the
electrical supply, the display will automatically
show 12:00 and the symbol
IEnsure the correct time of day is set before
using the oven.
To set the correct time of day :
a) press button
flashing (Fig. 1), set the correct time of day by
pressing buttons " " or " " (Fig. 2).
The time arrow symbol
seconds after the correct time is displayed (Fig. 3).
b) if the symbol is not flashing anymore, press
button twice.
Then, proceed as described in point a).
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing. We
recommend that you allow the oven to run
empty before starting to use it.
To do this, proceed as follows:
— press button
— press button
"Conventional Cooking" function
— set the temperature to 250 °C using the
increasing push button " ".
— Allow the oven to run empty for
approximately 45 minutes.
— open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking"
function for approximately 5-10 minutes.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm soapy water.
Before cooking for the first time, carefully
wash the oven accessories.
To open the oven door, always
catch the handle in its central part
(Fig. 5).
will flash.
and, while the symbol
will come off about 5
to switch on the oven.
twice and select the
and "Full Grill"
is
(Fig. 4).
B
Fig. 1
B
Fig. 2
B
Fig. 3
B
Fig. 4
Fig. 5
7