Operating Sequence; Load The Laundry; Select The Drying Time; Select The Option - Zanussi ZID100 Instruction Booklet

125983210.qxp 2006-01-06 11:56

Operating Sequence

Before using your tumble dryer for the first time, we
recommend you place a few damp cloths inside the
appliance and dry for approximately 20 minutes.
There may be dust inside a brand new tumble dryer.

1. Load the laundry

Open the door by pulling the door handle forwards.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught between
the door and filter.

2. Select the drying time

Turn the selector dial clockwise to the desired time
(in the high or low temperature range, according to
the fabrics). The mains-on light illuminates and the
programme starts.
3. Select the required option
Depress Low Temp.
fabrics you have to dry.
Page 8
Button depending on the

4. Start the machine

Depress START button for 2 seconds, the
machine starts operating.
To change a programme already in progress, turn
the selector dial to "0", select the new programme
and then depress START button.

5. When drying is completed

The machine stops automatically and the mains-on
light goes out.
Release button , if depressed.
Open the door and take out the laundry.
6. At the end of the
programme
Turn the selector dial to "0".
Clean the filter after every drying programme.
A clean filter ensures correct functioning of the
appliance.
8