What Happens If Something Goes Wrong; And Spare Parts - Zanussi ZO B 7 SO Instruction Booklet

What happens if something goes wrong

If the appliance is not working correctly, please carry out the following checks, before contacting your local
Zanussi Service Centre.
SYMPTOM
The oven does not come on
The oven temperature light does not come on
The oven light does not come on
It takes too much time to finish the dishes, or
they are cooked too fast.
Steam and condensation settle on the food and
the oven cavity.
Techical Assistance and Spare Parts
If after the checks listed in the previous chapter, the
appliance still does not work correctly, contact your
locals Zanussi Service Centre, specifying the type of
malfunctioning, the appliance model (Mod.), the
product number (Prod. No.) and the serial number
(Ser. No.) marked on the identification plate.
This plate is placed on the front external edge of the
oven cavity, as indicated in Fig. 14.
Original spareparts,
certified by the product
manufacturer and
carrying this symbol are
only available at our
Service Centre and
authorized spareparts
shops.
26
SOLUTION
Check the oven is in manual operation and that both a
cooking function and a temperature have been selected
or
Check the appliance is wired in properly, and the socket
switch or the switch from the mains supply to the oven are
ON.
Turn the thermostat knob on a temperature
or
Turn the oven function control knob on a function.
Turn the oven function control knob on a function
or
Buy a new oven light bulb, asking for it to your local Zanussi
Service Centre and replace it by following the instruction
provided in this booklet.
Refer to the contents of this booklet, especially to the
chapter "Using the Oven".
Leave dishes inside the oven no longer than 15-20 minutes
after the cooking is completed.
Mod.
PROD. NO.
SER. NO.
MOD. TYPE
PROD. NO. SER. NO.