Init. (Scene File Initialization); End (Ending On Screen Display) - Toshiba IK-CU51 Instruction Manual

7.7 INIT. (Scene File Initialization)

This reset settings of the scene file to the factory
setting.
1
Select a scene file (A or B) to initialize the setting
in FILE.
2
Move the cursor to INIT. using the UP or DOWN
button.
3
Press the FUNC button. The selected scene file
(A or B) is displayed. NO/YES is displayed.
4
Select NO when not initializing. Select YES and
press the FUNC button when initializing.
Factory setting (the following setting if INIT. is executed)
The setting is common to scene files A and B.
SHUTTER AUTO
PEDESTAL 00
SYNC EXT.VBS
AREA LINK:1
WB-OFFSET 00

7.8 END (Ending ON SCREEN DISPLAY)

To turn off the menu, move the cursor to END using
the UP or DOWN button and press the FUNC but-
ton. To store the setting in the camera, be sure to
turn off the display by pressing END. When the dis-
play is turned off, the setting is stored in the cam-
era. If the POWER switch is turned off while the menu
is being displayed, the setting is not stored and the
old data remains.
20
SEP WB 1
SHUTTER 1
LEVEL
BLC
H-PHS 50 PEAK:AVE 00:10
SC-PHS 0
SC-FINE 50
FILE A
SHUTTER AUTO
PEDESTAL 00
SYNC INT
AREA LINK:1
WB-OFFSET 00
INIT.
END
PUSH FUNC TO SELECT
FILE A
SHUTTER
PEDESTAL
SYNC
AREA
WB-OFFSET
INIT. NO
END YES
PUSH FUNC TO SELECT
00
OFF
FILE A
SHUTTER AUTO
PEDESTAL 00
SYNC INT
AREA LINK:1
WB-OFFSET 00
INIT.
END
PUSH FUNC TO SELECT