Eco Dect; Using The Handset As An Alarm Clock - Gigaset C300H User Manual

ECO DECT

You are helping to protect the environment
with your Gigaset.
Reducing energy consumption
Your telephone has a power-saving adapter
plug and uses less power.
Reducing radiation (dependent on
base)
The radiation can only be reduced if your
base supports this function.
The transmission power of your telephone is
automatically reduced depending on the
distance to the base.
You can further reduce the radiation from
the handset and base by using Eco Mode or
Eco Mode+. For further information, please
refer to your base user guide.
Using the handset as an
alarm clock
Prerequisite: The date and time have
already been set.
Activating/deactivating the alarm
clock
¤ Alarm Clock ¤ Activation (
§Menu§
After you activate the alarm clock, the menu
for setting the wake-up time opens auto-
matically.
The ¼ icon and wake-up time are shown on
the display.
A wake-up call is signaled on the display
(¢ page 3) and with the selected ringer vol-
ume and melody (¢ page 33). The wake-up
call sounds for 60 seconds. If no key is
pressed, the wake-up call is repeated twice
at five-minute intervals and then switched
off.
During a call, the wake-up call is only sig-
naled by a short tone.
Setting the wake-up time
¤ Alarm Clock ¤ Wake up time
§Menu§
~
Enter the wake-up time in hours
and minutes, then press
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Prerequisite: A wake-up call is sounding.
§Off§
Press the display key. The wake-
up call is deactivated.
Or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repeti-
tion, the wake-up call is deacti-
vated completely.
ECO DECT
³
= on)
§OK§
.
31