Table of Contents
Advertisement
What happens if something goes wrong
CALL FOR SERVICE
The programmer display carries out a self check,
in order to verify that it is working correctly. If a
problem is identified, the spanner symbol
will be displayed.
In the event of a breakdown, a NUMBER will
appear. If numbers 001 or 002 appear, it means
that the meat probe is at fault and needs to be
replaced.
If the
appears when you plug in the meat
probe.
Ensure the interior of the oven does not exceed the
pre-set temperature of the meat probe.
If a higher number appears, please contact
your nearest Fisher & Paykel authorised
Service Centre quoting the number of the fault
code, together with the model and the serial
numbers.
ELECTRICAL FAILURE
In the event of a power failure, any programme
functions displayed will disappear. Then power is
restored, the clock will flash 12:00, and all
previous functions will have to be reselected.
Technical assistance
If after these checks the fault remains, you should contact your nearest Fisher & Paykel authorised
Service Centre and advise them of the following/
{
* Model No
on rating label situated at the bottom centre of the oven front frame.
* Serial No
* Date of Purchase
* Brief description of fault
Please note that it will be necessary to provide proof of purchase for any in guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as the engineer will
make a charge if the fault is not a mechanical or electrical breakdown.
26
Advertisement
Table of Contents
